Tags: microstructure

All Categories (1-20 of 31)

  1. A Unified Constitutive Material Model With Application to Machining

    12 Jan 2015 | Contributor(s):: Liu, Rui

    Advisors: Shreyes N. Melkote, Steven S. Danyluk, Richard Neu, Naresh Thadhani, Roshan VengazhiyilFinite element simulation of metal cutting processes offers a cost-effective method to optimize the cutting conditions and to select the right tool material and geometry. A key input to such...

  2. Ali Khosravani

    Ali is a PhD candidate in Mechanical engineering department at Georgia Institute of Technology. He earned two masters degrees, one in mechanical engineering at Brigham Young University in 2012 and...

    https://matin.gatech.edu/members/1028

  3. Analysis and Feedback Control of the Scanning Laser Epitaxy Process Applied to Nickel-Base Superalloys

    07 Apr 2013 | Contributor(s):: Bansal, Rohan

    Advisors: Suman Das, Sudarsanam Babu, Yogendra Joshi, Nader Sadegh, Jianjun ShiScanning Laser Epitaxy (SLE) is a new layer-by-layer additive manufacturing process being developed in the Direct Digital Manufacturing Laboratory at Georgia Tech. SLE allows for the fabrication of three-dimensional...

  4. Blog Post_1: CSE 8803 / ME 8883 - Superalloy - Project Statement

    The latest update from Superalloys group at the end of week 3: The type of linkage we proposed to establish is Process-Structure linkage on Nickel-based single-crystal superalloy (CMSX-8) which is...

    https://matin.gatech.edu/groups/materials_informatics_course_fall_2016/wiki/Superalloy:CSE8803ME8883Superalloy

  5. Characterization of Multiscale Porosity in Cement-Based Materials: Effects of Flaw Morphology on Material Response Across Size and Time Scales

    28 Jun 2016 | Contributor(s):: Mayercsik, Nathan Paul

    Advisors: Kimberly E. Kurtis, Chloe Arson, Arun M. Gokhale, Laurence J. Jacobs, Lori L. Graham-BradyIt is perhaps paradoxical that many material properties arise from the absence of material rather than the presence of it. For example, the strength, stiffness, and toughness of a concrete are...

  6. Construction of Representative 3D Microstructures From Complete and Partial Statistics

    11 Jan 2017 | Contributor(s):: Turner, David M

    Advisors: Surya R Kalidindi, David L McDowell, Hamid Garmestani, Le Song, Karl I JacobThe principle concern of the material scientist is the connection between microstructure, properties, and processing. Microstructure is characterized via experimental measurements of geometry at the appropriate...

  7. Crystal Plasticity Finite Element Simulations Using Discrete Fourier Transforms

    22 May 2014 | Contributor(s):: Al-Harbi, Hamad F.

    Advisors: Surya R. Kalidindi, David L. McDowell, Richard W. Neu, Hamid Garmestani, Christopher L. MuhlsteinCrystallographic texture and its evolution are known to be major sources of anisotropy in polycrystalline metals. Highly simplified phenomenological models cannot usually provide reliable...

  8. Data-driven reduced-order models for rank-ordering the high cycle fatigue performance of polycrystalline microstructures: codes and data files

    01 Feb 2018 | Contributor(s):: Noah H. Paulson

    This data-set contains the codes and data files relevant to the paper titled "Data-driven reduced-order models for rank-ordering thehigh cycle fatigue performance of polycrystalline microstructures" [Paulson2017_HomogenizationHCF]. Data-files are provided so that the figures...

  9. Effects of Microstructure and Chemistry on the Ignition Sensitivity of PBX Under Shock Loading

    14 Jan 2020 | Contributor(s):: Miller, Christopher M.

    Advisors: Min Zhou, Richard Neu, Ting Zhu, Julian Rimoli, Cole YarringtonThe ignition sensitivity of heterogeneous energetic materials subject to shock loading is analyzed using both a Lagrangian and Eulerian computational framework. The specific focus here is on the various microstructure...

  10. Effects of Microstructure on the Spall Behavior of Aluminum-Magnesium Alloys

    22 May 2014 | Contributor(s):: Whelchel, Ricky L.

    Advisors: Naresh N. Thadhani, Thomas H. Sanders, Arun M. Gokhale, Sunil Dwivedi, Suveen Mathaudhu, Victor DangerfieldThis research focuses on the spall properties of aluminum-magnesium (Al-Mg)alloys.Aluminum alloy 5083 (Al 5083) was used as a model alloy for the work performed in this study....

  11. Ensemble of 3-D 2-phase microstructures generated in Dream.3D

    23 Jan 2017 | Contributor(s):: Marat I. Latypov, Surya R. Kalidindi

    The ensemble contains 4 classes*:- microstructures with equiaxed features, volume fraction [5, 95]- matrix/spherical inclusions [5, 35] & [65, 95]- matrix/disk inclusions [5, 35] & [65, 95]- matrix/needle inclusions [5, 35] & [65, 95]* both classes and volume fractions represent...

  12. Estimation of Chord Length Distributions for 2D microstructure images

    10 Mar 2017 | | Contributor(s):: David Turner, Surya R. Kalidindi

    A software implementation based on the following research study (see References below for full citation): http://iopscience.iop.org/article/10.1088/0965-0393/24/7/075002 Abstract Chord length distributions (CLDs) and lineal path functions (LPFs) have been successfully utilized in prior literature...

  13. Estimation of Chord Length Distributions for 3D microstructure images

    10 Mar 2017 | | Contributor(s):: David Turner, Surya R. Kalidindi

    A software implementation based on the following research study (see References below for full citation): http://iopscience.iop.org/article/10.1088/0965-0393/24/7/075002 Abstract Chord length distributions (CLDs) and lineal path functions (LPFs) have been successfully utilized in prior literature...

  14. Fundamental Understanding of NOx Sequestration Capacity and Pathways in Nano-TiO2 Engineered Cementitious Materials

    11 Jan 2021 | | Contributor(s):: Jin, Qingxu

    Advisors: Kimberly E. Kurtis, Lawrence F. Kahn, Yuanzhi Tang, Emily Grubert, Jeffrey W. BullardThe ubiquity of concrete in the urban environment and the upscaling of nanomaterial production have prompted interest in the incorporation of titania (TiO2) nanoparticles into cementitious materials....

  15. Hydration and Microstructural Development of Portland Limestone Cement-Based Materials

    17 Aug 2017 | | Contributor(s):: Nadelman, Elizabeth Imber

    Advisors: Kimberly E. Kurtis, Lawrence F. Kahn, Susan E. Burns, Carsten Sievers, T. Russell GentryThe manufacture of portland cement contributes an estimated 5-8% of all anthropogenic carbon dioxide (CO2) emissions each year. One strategy to curb these cement-induced CO2 emissions is to reduce...

  16. Impact of Process Parameter Modification on Poly(3-Hexylthiophene) Film Morphology and Charge Transport

    13 Jan 2014 | | Contributor(s):: Lee, Jiho

    Advisors: Elsa Reichmanis, Yulin Deng, Dennis W. Hess, William J. KorosOrganic electronics based on p-conjugated semi-conductor raises new technology, such as organic film transistors, e-paper, and organic photovoltaic cells that can be implemented cost-effectively on large-area applications....

  17. Metakaolin-Portland Limestone Cements: Evaluating the Effects of Chemical Admixtures on Early and Late Age Behavior

    20 Aug 2018 | | Contributor(s):: Hosseinzadeh Zaribaf, Behnaz

    Advisors: Kimberly Kurtis, Lawrence Kahn, Susan Burns, Russel Gentry, Newell Washburn, Sharad MathurOne of the most effective and applicable ways to mitigate the greenhouse gas emissions contributed by cement production is to partially replace a portion of the cement clinker with alternative...

  18. Microstructure Maker - 3D Microstructure Reconstruction from 2D data/images

    10 Mar 2017 | | Contributor(s):: David Turner, Surya R. Kalidindi

    Microstructure Maker is a a MATLAB / C++ implementation of solid texture synthesis algorithms for constructing statistically representative 3D microstructure datasets from only 2D data. This software attempts to create 3D reconstructions of microstructures from a limited number of oblique 2D...

  19. Microstructure Sensitive Multiscale Modeling of Fracture in Polycrystalline Metals

    10 Jun 2021 | | Contributor(s):: Roy, Ushasi

    Advisors: Min Zhou, David McDowell, Ting Zhu, Antonia Antoniou, Arash YavariSystematic exploration of the correlation between macroscale properties and microstructure attributes provides decision support to design new material microstructures with tailored properties. Currently no systematic...

  20. Microstructure-Sensitive Simulation of Shock Loading in Metals

    22 May 2014 | | Contributor(s):: Lloyd, Jeffrey T.

    Advisors: David L. McDowell, John D. Clayton, Min Zhou, Julian J. Rimoli, Naresh N. Thadhani, Shuman XiaA constitutive model has been developed to model the shock response of single crystal aluminum from peak pressures ranging from 2-110 GPa. This model couples a description of higher-order...